Chemical constituents of RS-2:
alloy | % | Ni | Cr | Mo | C | Mn | Si | S | P | Cu | Other trace elements |
RS-2 | min | 24 | 17 | 2.5 | 12 | 2 | |||||
max | 28 | 22 | 3.5 | 0.06 | 1 | 2 | 0.03 | 0.035 | 3 | 0.5 |
Minimum mechanical properties of RS-2 alloy at room temperature:
Alloy state | Tensile Strength Rm N/mm² | Yield Strength Rp0.2 N/mm² | ElongatSion A5 % | Brinell hardness HB |
Solution treatment | 568 | 313 | 35 | 210 |
RS-2在常温下合金的机械性能的最小值:
Alloy state | Tensile Strength Rm N/mm² | Yield Strength Rp0.2 N/mm² | ElongatSion A5 % | Brinell hardness HB |
Solution treatment | 568 | 313 | 35 | 210 |
RS-2 alloy has the following characteristics:
This is a sulfuric acid-resistant austenitic stainless steel with lower alloy content and better corrosion resistance.
Applications of RS-2:
The plate heat exchanger, wire mesh defoamer and acid-resistant pump castings made of this material are widely used in sulphuric acid, phosphoric acid and phosphate fertilizer industries.
Prev :1J79
Next :Inconel 600
Address:
No. 17, West Zone, Xiangyun Road, Jixi County, Xuancheng, Anhui, China
Contact: MR TOM
CELL: 15868588652
Tel: 0577-86887759
Fax :0577-86887759
Email: tom123631@163.com
SKYPE: tongwenguan813
Contact: Linda Lu
Cell: +86 15167897803
Tel: +86 0577-86699079
Fax:+86 0577-86859555
Email: linda_lfy@163.com
Skype: lfyulrica51